Water Bowsers · Dongfeng 4x2 water bowser

Dongfeng 12,000 Litres 4x2 Water Bowser Truck for Road Cleaning and Dust Control

The Dongfeng 4x2 water bowser is a compact 12,000-litre spraying truck for municipal road washing, construction dust control and site irrigation. Its 40-60 m3/h pump and 12-16 m sprinkling width cover urban carriageways and site roads in fewer passes than small-format bowsers.

Core capabilities in operation

Technical parameters translated into working results. Figures are reference estimates and vary with operating conditions.

ParameterWorking resultCalculation conditionsFactors that change the result
12,000-litre Q235B tankOne fill dampens roughly 1-3 km of 14 m wide road, depending on how heavily the surface is sprayed.Application rate of about 0.3-1.0 L per square metre for dust dampening through the standard spray bars.Road cleanliness, ambient temperature, traffic re-soiling rate and the spray pattern selected.
Pump flow 40-60 m3/hA full tank supports roughly 12-18 minutes of continuous spraying, sized for typical urban washing rounds between refills.Continuous operation at the rated pump flow range.Selected nozzles, pump wear and simultaneous use of front flush plus side sprays.
Sprinkling width 12-16 mCovers a dual-lane carriageway in a single pass at working speed.Standard side spray bars at normal operating pressure.Pressure setting, nozzle condition and wind.
About 9,350 kg of legal payload roomGVW of 16,200 kg minus the 6,850 kg curb weight leaves roughly 9,350 kg, so the tank is normally filled to about 9,000 litres to stay within legal weight.Water at 1.0 kg per litre with crew, fuel and equipment on board.Actual equipment weight, fuel level and local axle-load enforcement.

Technical specifications

ManufacturerCLW (Chengli Special Automobile)
Chassis brandDongfeng 4x2 water bowser chassis
Drive layout4x2
Engine power143 kW
Fuel typeDiesel
Wheelbase3950 mm
Gross vehicle weight16 200 kg
Curb weight6 850 kg
Dimensions (L×W×H)8 070 × 2 500 × 3 200 mm
Maximum speed105 km/h
Capacity12,000 litres (12 m3 Q235B tank)

Body and tank specifications

Tank capacity12 m3
Tank dimension4000 x 2350 x 1560 mm
Tank materialQ235B carbon steel

Additional chassis specifications

Approach departure angle18 / 12 degrees
Axles2 (axle loads 5,600 / 10,600 kg)
Front rear overhang1,260 / 2,450 mm
Seating capacity3
Tire specification10.00R20 18PR, 6 tyres

Working system specifications

Optional devicesFront flushing system, rear water cannon, electronic water cannon, high-position sprinkler, pneumatic valves
Pump flow40-60 m3/h
Sprinkling width12-16 m

Configuration options and trade-offs

  • Emission standard: Euro 2 to Euro 6 available; confirmed per order and destination market
  • Spray devices: Front flushing, rear or electronic water cannon, high-position sprinkler selectable
  • Chassis: Larger-capacity chassis available for 17 m3 and above requirements

Where this vehicle works well

Suitable conditions

  • Municipal road washing and kerb-side cleaning on paved streets
  • Construction-site haul-road dust suppression
  • Landscape and greening irrigation rounds

Not recommended for

  • Long off-road water haulage where a 6x4 or 8x4 bowser is more suitable
  • Drinking-water supply without a food-grade tank and certification

Delivery and shipping

Shipping methodsRORO: Roll-on/roll-off shipping to Lagos · Flat rack: Container flat rack for shared shipments
Destination port notesCommon delivery ports for Nigerian orders include Lagos Apapa and Tin Can; the final shipping plan is confirmed with the quotation.

Frequently asked questions

    How much road does one tank cover?

    At typical dust-dampening rates of 0.3-1.0 litres per square metre, a 12,000-litre tank covers roughly 1-3 km of 14 m wide road before refilling.

    How wide does it spray?

    The standard side spray bars cover 12-16 m, enough for a dual-lane carriageway in one pass.

    How much water can it legally carry?

    With a 16,200 kg GVW and 6,850 kg curb weight, about 9,350 kg of payload room remains, so the tank is normally filled to around 9,000 litres to stay within legal weight.

    Can it be used for washing rather than dampening?

    Yes. The 40-60 m3/h pump supports higher-flow washing with the front flushing system and rear water cannon options.

    What optional spray equipment is available?

    Options include a front flushing system, rear water cannon, electronic water cannon, high-position sprinkler and pneumatic valve control, confirmed per order.

Built for daily watering rounds

This 4x2 bowser keeps the working width and tank size balanced for urban rounds: a 12 m3 Q235B tank, 12-16 m of sprinkling width and a 40-60 m3/h pump that switches between dampening and washing. Front flushing and water cannon options extend the truck from dust duty to active road washing.

The 8.07 m overall length keeps the truck manoeuvrable on built-up streets, and the 10.00R20 tyre fit matches common municipal spares. Request a quotation with your tank volume, spray devices and destination port, and the CLW GROUP team will confirm the configuration and shipping plan.

Verification and support

Vehicle data on this page is mapped from the manufacturer's product centre. Tank material, emission standard and compartment layout are confirmed per order; final specifications, documentation and certification are subject to the technical agreement and destination-market requirements.